Valtra A95l Manual do Operador Página 17

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 37
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 16
--- 7 9 ---
H. Periodic maintenance
H 4.12. Checkoillevelinhubreduc-
tion gears, 4---wheel drive (22)
A3565--- 108
Turn the wheel until the oil surface indicator line is
horizontal. The oil surface should be level with the hole.
Add more oil if necessary. Oil quality should be in
accordance with the table on page 64.
H 4.13. Check hydraulic oil level (23)
69--- 76
When the hydraulic system is filled to the minimum mark
on the dipstick the total volume of oil is 25 l, of which 14 l
is available for the auxiliary hydraulics.
It is, however, recommended that the system be filled to
the maximum mark on the dipstick (total volume =35 l). In
this case 24 l is available for the auxiliary hydraulics.
Adding oil, see point 26 change oil in hydraulic system.
Oil quality should be in accordance with the table on
page 64.
H 4.14. Change pressure filter in hy-
draulicsystem(24)
A3565--- 100
--- Clean surrounding parts
--- Loosen the filter and take out the element
--- Wash the filter housing with diesel fuel and fit the new
element (oil the seal first). The seal must always be
changed.
--- Tighten the filter with a suitable wrench to a torque of
200 Nm.
IMPORTANT: Always change the filter when carrying out
repairs caused by impurities in the hydraulic system.
Clean suction strainer as described earlier (see service at
1000 hours intervals page 81).
IMPORTANT: If the external hydraulics are used
extensively and no return oil filter is used, the filter must
be changed ever 250 hours.
If the external hydraulics are used extensively it is
recommended that a return filter should be mounted in
the line (extra equipment).
On tractors with a return filter, all oil which is returning
from the outside machine, goes through the return filter.
Follow to changing intermediate on the return filter.
H 4.15. Change oil filter in transmis-
sion (25)
65--- 77
--- Clean surrounding parts and remove the filter
--- Oil a new seal and fit the new filter. Tighten by hand (not
too tight).
Vista de página 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 36 37

Comentários a estes Manuais

Sem comentários